Loading ...
Loading ...
Loading ...
CHECK IGNITION OF SURFACE
BURNERS
6
Operation of all cooktop and oven burners should be
checked after the range and gas supply lines have been
carefully checked for leaks.
Electric Ignition Models
Select a top burner knob and simultaneously push in
and turn to LITE position. You will hear a clicking sound
indicating proper operation of the spark module. Once the
air has been purged from the supply lines, burners should
light within 4 seconds. After burner lights, rotate knob out
of the LITE position. Try each burner in succession until
all burners have been checked.
Quality of Flames
The combustion quality of burner flames needs to be
determined visually.
If burner flames look like (A), call for service. Normal
burner flames should look like (B) or (C), depending on
the type of gas you use.
With LP gas, some yellow tipping on outer cones
is normal.
(C) Soft blue
flames—Normal
for natural gas
(B) Yellow tips on
outer cones—
Normal for LP gas
(A) Yellow flames—
Call for service
CHECK IGNITION OF OVEN BURNER
7
The oven is designed to operate quietly and automatically.
To operate the oven, touch the BAKE pad and then touch
the number pads until 350° appears in the display. Touch the
START pad. After 30–90 seconds, the oven burner will ignite
and burn until the set temperature is reached.
Electric ignition models require electrical power to operate.
In case of a power outage, the oven burners on these models
cannot be lit manually with a match. Gas will not flow unless
the glow bar is hot.
If the oven is in use when a power outage occurs, the burner
will shut off and cannot be re-lit until power is restored.
45
Installation Instructions
Loading ...
Loading ...
Loading ...