Loading ...
Loading ...
Loading ...
En-5
● OPERATING INSTRUCTIONS ●
FAN SPEED AND
AIRFLOW DIRECTION ADJUSTMENT
I-SAvE OPERATION
Press to select fan speed. Each press changes
fan speed in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
• Use higher fan speed to cool/heat the room more powerfully. It is rec-
ommended
to lower the fan speed once the room is cool/warm.
• Use lower fan speed for quiet operation.
Note:
Multi system operation
When several indoor units are operated simultaneously for heating operation,
the temperature of the airow may be low. In this case, it is recommended to set
the
fan speed to AUTO.
Press to select airow direction. Each press
changes airow direction in the following order:
• Two short beeps are heard from the indoor unit when set to AUTO.
Airflow direction
(AUTO) .........The vane is set to the most efcient airow direction. COOL/
DRY:horizontal position. HEAT:position (5).
(Manual) .......For efficient air conditioning, select the upper position for
COOL/DRY, and the lower position for HEAT. If the position
(4) or (5) is selected during COOL/DRY,the vane automatically
moves to the horizontal position after 0.5 to 1 hour to prevent
any condensation from dripping.
(Swing) .........The vane moves up and down intermittently.
nTo change the horizontal airow direction.
Move the vertical vane manually before starting operation.
1
Press during COOL, ECONO COOL, or HEAT
mode to select i-save mode.
2
Set the temperature, fan speed, and air ow direction.
• The same setting is selected from the next time by simply pressing
.
• Two groups of setting can be saved. (One for COOL/ECONO COOL,
one for HEAT)
• Select the appropriate temperature, fan speed, and airflow direction
according to your room.
• Normally, the minimum temperature setting in HEAT mode is 16°C.
However, during i-save operation only, the minimum temperature set
-
ting is 10°C.
Press again to cancel i-save operation.
• i-save operation also is canceled when the MODE button is pressed.
i-save operation
A simplified set back function enables to recall the preferred (preset) setting with
a single push of the
button. Press the button again and you can go back
to the previous setting in an instance.
Example of use:
1.
Low energy mode
Set the temperature 2°C to 3°C warmer in COOL and cooler in HEAT mode.
This
setting is suitable for unoccupied room, and while you are sleeping.
2. Saving frequently used settings
Save
your preferred setting for COOL/ECONO COOL and HEAT. This ena-
bles
you to select your preferred setting with a single push of the button.
(AUTO) (Quiet) (Low) (Med.) (High) (Super High)
(AUTO) (1) (2) (3) (4) (5) (SWING)
JG79A796H02_en.indd 5 2013/11/05 15:09:21
Loading ...
Loading ...
Loading ...