Loading ...
Loading ...
Loading ...
En-3
● OPERATING INSTRUCTIONS ●
RESET
CLOCK
• Make sure the polarity of the batteries is correct.
•
Do not use manganese batteries and leaking batteries. The remote controller
could malfunction.
• Do not use rechargeable batteries.
• Replace all batteries with new ones of the same type.
• Batteries can be used for approximately 1 year. However, batteries with
expired shelf lives last shorter.
• Press RESET gently using a thin instrument.
If the RESET button is not pressed, the remote controller may not operate
correctly.
Before operation: Insert the power supply plug into the power outlet and/or turn the breaker on.
• Press CLOCK gently using a thin instrument.
Operation indicator lamp
Remote control receiving section
Emergency
operation switch
Page 4
Air inlet (back and side)
Piping
Drainage
hose
Air outlet
Drain outlet
Horizontal vane
Vertical vane
Air outlet
Fan
Air lter
(Catechin air lter)
Air inlet
Heat exchanger
Front panel
Fan guard
Outdoor unit
Installing the remote controller batteries Setting current time
NAME OF EACH PART
PREPARATION BEFORE OPERATION
1.
Press CLOCK.
3.
Press CLOCK again.
2.
Press the TIME buttons to set the
time.
Each press increases/decreases
the time by 1 minute (10 minutes
when pressed longer).
Indoor unit Remote controller
Outdoor units may be different in appearance.
1.
Remove the front lid.
2.
Insert the negative
pole of AAA alkaline
batteries rst.
3.
Install the front lid.
4.
Press RESET.
Air cleaning lter
(Anti-Allergy Enzyme
Filter, option)
Remote controller
holder
Signal transmitting
section
Distance
of signal :
About 6 m
Beep(s) is (are) heard
from the indoor unit when
the signal is received.
Operation display
section
ON/OFF
(operate/stop)
button
Temperature buttons
Page 4
Operation
select button
Page 4
ECONO
COOL
button
Page 6
FAN speed
control button
Page 5
Off-timer button Page 6
On-timer button Page 6
VANE
control button
Page 5
TIME set buttons Pages 3, 6
Increase time
Decrease time
CLOCK button Page 3
RESET button Page 3
Lid
Slide down to open
• Install the remote control-
ler holder in a place where
the signal can be received
by the indoor unit.
Only use the remote controller provided with the unit.
Do not use other remote controllers.
i-save button Page 5
RESET
CLOCK
Display section
JG79A796H02_en.indd 3 2013/11/05 15:09:19
Loading ...
Loading ...
Loading ...