Loading ...
Loading ...
Loading ...
FLEXIBLE CONNECTORS - If the gas range/oven is connected to a gas supply with a
metal exible connector, move the range/oven with CAUTION for service or cleaning.
Flexible connectors are not intended for repeated bending. Do not allow cleaners to make
contact with exible connectors.
The connector and its ttings are designed for use only on the original
installation and are not to be reused for another appliance or at another
location. Connectors must comply with ANSI Z21.24.
GAS RECESSED WALL OVEN
Slide the oven unit into the cabinet recess as shown in the diagram. Secure the oven
unit to the cabinet with wood screws. Be sure to use the cabinet spacer with the wood
screw as a “washer” between the wood cabinet and the oven front frame.
The recess in which the oven is installed shall be constructed so as to provide a
complete closure around the recessed portion of the unit and any openings around
gas and electrical service outlets MUST be closed at time of installation.
The
installation must conform with local codes. In the absence of local codes,
the National Fuel Gas Code Z223.1 latest edition.
A MANUAL GAS VALVE MUST BE INSTALLED IN AN ACCESSIBLE
LOCATION IN THE GAS LINE EXTERNAL TO THE UNIT FOR THE
PURPOSE OF TURNING ON OR SHUTTING OFF GAS TO THE UNIT.
INSURE PROPER
GROUND EXISTS
BEFORE USE.
25
ELECTRICAL GROUNDING
INSTRUCTIONS
This appliance is equipped with a three prong
grounding plug for your protection against
shock hazard and should be plugged directly
into a properly grounded receptacle. Do not cut
or remove the grounding prong from this plug.
Loading ...
Loading ...
Loading ...