Summit ZEL05 Coil Cooktop

User Manual - Page 21

For ZEL05.

PDF File Manual, 32 pages, Read Online | Download pdf file

ZEL05 photo
Loading ...
Loading ...
Loading ...
21
ALIGNMENTS AND ADJUSTMENTS
Oven Door Spring Adjustments
The oven door springs are properly adjusted before leaving the factory. The springs should
be adjusted to allow the door to remain open when pulled 90 degrees forward and yet pull
the door tight against the oven front frame when closed. If adjustments should become
necessary, remove the storage drawer and grasp spring with ngers, and pull downward.
To give more tension, push toward rear of range and attach in rst slot. To make spring
adjustment on ranges without storage drawer, remove false panel and follow the same
procedure.
Make certain all surface elements are
cool and all switches are in the OFF
position prior to seating elements.
Seating Top Elements
The top element may need initial
seating after installation of the stove
or after they have been unplugged and
re-installed. Palm the element as
shown. Pick up on the rear section
with your ngers, while at the same
time, push down on the front of the
element with the palm of your hand.
Storage
Your electric range is equipped with a
storage area located beneath the oven cavity.
To access this compartment, gently lift on
the front edge of the “drop-down” panel and
let it fall forward as shown. ONLY LIFT ON
THE FRONT EDGE OF THE PANEL SO
AS TO NOT PINCH YOUR FINGERS. Do
not use this panel as a step or shelf.
Coil Logic System
Some models may be equipped with Brown’s
exclusive Coil Logic safety system. It is designed
to prevent overheating by utilizing an automatic
cut-off sensor to power off the coil element if
higher than necessary temperatures are detected.
Once cooled, these sensors will disengage,
allowing power to return to the coil element.
The Coil Logic safety sensors are visible from the
top of the burner bowl (refer to gure). When the
coil elements are off and cool, the drip pans and
Coil Logic sensors can be cleaned with
mild soap and warm water. Dry thoroughly before resuming use. Always keep all
surfaces and subtop areas clean for optimal operation. Do not use aluminum foil
to line the drip pans. Improper use of aluminum foils may result in shock or re
hazard.
Loading ...
Loading ...
Loading ...