Loading ...
Loading ...
Loading ...
157
2-4. Using other driving systems
2
When driving
n Dynamic laser cruise control warning lights, display and buzzers
Warning lights, display and buzzers are used to indicate a system malfunc-
tion or to alert you to the need for caution while driving.
The warning codes indicate the following.
If the same code appears again after implementing the correction procedure,
or if the cruise control cannot be set, contact your Toyota dealer.
n Switching modes
The mode cannot be switched to constant speed control mode if vehicle-to-
vehicle distance control mode has been used. The mode also cannot be
switched from constant speed control to vehicle-to-vehicle control mode.
Turn the system off by pressing the “ON-OFF” button, and turn it on again.
“CRUISE” indicator light
Master warning light
Warning code
Warning code Details Correction procedures
C1
Indicates that the laser
radar sensor is dirty or
covered with ice.
Clean the sensor.
C2
Indicates that the system
is unable to judge the vehi-
cle-to-vehicle distance.
• Stop the wiper or switch
the wiper to variable inter-
mittent operation.
• Avoid direct sunlight.
• Wait until the weather
becomes clear.
E3
(Flashing)
Indicates that a system
malfunction has been
detected.
Turn off and restart the
“ENGINE START STOP”
switch or the engine
switch.
Loading ...
Loading ...
Loading ...