Loading ...
Loading ...
Loading ...
44
3
INSTALL THE PEDESTAL TO THE
WASHER OR DRYER
A
Place the pedestal against the bottom of the
unit. Check to be sure the drawer front is at the
front of the washer.
B
Align the holes in the pedestal with the holes in
the bottom of the unit. Use a Phillips screwdriver
to install the 4 bolts through the pedestal and
LQWRWKHXQLW³GRQRWWLJKWHQ
C
Slide the pedestal toward the unit, until it is
aligned front to back. Use a 7 mm socket
wrench to securely tighten the bolts.
2
PREPARE THE PEDESTAL
A
Pull the drawer
out as far as it
will go.
B
Remove
screws from
drawer slides.
Slide drawer
out of the
base and set
aside.
FOR DRYERS ONLY:
C
Locate the 4 support pads from the parts
package. Each pad has 2 protrusions that fit
into the holes on top of the pedestal. Press the
rubber pads into each set of corner holes on
the top of the pedestal as shown.
NOTE: The support pads should be installed on the
dryer only. DO NOT INSTALL THESE PADS ON THE
WASHER PEDESTAL.
Installation Instructions
Loading ...
Loading ...
Loading ...