Loading ...
Loading ...
Loading ...
13
Use the «hc» baby food chopper (10) for
smaller quantities. Maximum operation
time for the «hc» baby food chopper:
30 seconds. Max. amounts 3.5 oz. / 100 g.
Immediately stop processing when motor
speed decreases and/or strong vibrations
occur.
Before Use
• Pre-cut foods into small pieces for
easier chopping.
• Remove any bones, tendons and gristle
from meat to help prevent damage to
the blades.
• Make sure the anti-slip rubber ring
(10d/11d) is attached to the bottom of
the chopper bowl.
Assembly and Operation
• Carefully remove the plastic cover from
the blade.
• The blade (10b/11b) is very sharp!
Always hold it by the upper plastic part
and handle it carefully.
• Place the blade on the center pin of the
chopper bowl (10c/11c). Press it down
and give it a turn so that it locks into place.
• Fill the chopper with food and put on
the lid (10a/11a).
• Align the chopper with the motor body
(4) and click together.
• To operate the chopper, switch on the
appliance. During processing, hold the
motor body with one hand and the
chopper bowl with the other.
• Always chop harder foods (e.g. parme-
san cheese) at full speed.
• When chopping is complete, unplug
and press the EasyClick release buttons
to detach the motor body.
• Lift the lid up. Carefully take out the
blade before pouring out the contents
of the bowl. To remove the blade,
slightly turn it then pull it off.
Caution
• Do not use the chopper attachment to
process extremely hard foods, such as
unshelled nuts, ice cubes, coffee
beans, grains, or hard spices e.g.
nutmeg. Processing these foods could
damage the blades.
• Never place the chopper bowl in the
microwave oven.
Food Processor Attachment
The food processor attachment (12) can
be used for:
• chopping;
• slicing, shredding, and making french
fries.
Chopping (E)
Using the blade (12h) you can chop meat,
hard cheese, onions, herbs, garlic, vege-
tables, bread, crackers, and nuts.
Refer to the Processing Guide E for maxi-
mum quantities, recommended times and
speeds.
Before Use
• Pre-cut foods into small pieces for eas-
ier chopping.
• Remove any bones, cartilage, tendons
and gristle from meat to help prevent
damage to the blades.
• Make sure the anti-slip rubber ring
(12g) is attached to the bottom of the
food processor bowl.
Assembly and Operation
• Carefully remove the plastic cover from
the blade.
• The blade (12h) is very sharp! Always
hold it by the upper plastic part and
handle it carefully.
• Place the blade on the center pin of the
bowl (12f). Press it down and give it a
turn so that it locks into place.
• Fill the bowl with food. Attach the lid (12a)
to the bowl with the interlock (12e) posi-
tioned to the right of the bowl handle.
• To lock the lid, turn it clockwise so that
the interlock engages with a click.
5722112014_MQ 725-735-777 USCA_S6-36.indd 135722112014_MQ 725-735-777 USCA_S6-36.indd 13 21.12.15 09:1521.12.15 09:15
Loading ...
Loading ...
Loading ...