Loading ...
Loading ...
Loading ...
Operating the appliance en
41
Programme end during rinse
hold
- - - 0 appears in the display panel
and the indicator lamp of the I button
flashes.
Continue the program by:
■ Pressing the I button or
■ Selecting a spin speed or setting the
program selector to Spin and then
pressing the I button.
Programme end
End appears in the display panel and
the indicator lamp of the I button is
off.
The end of the programme will also be
displayed on the floor if:
Depends on the model
■ timeLight (visual display) has been
activated and is visible.
■ Energy-saving mode has not been
activated. ~ Page 13
Removing laundry/switching
off the appliance
1. Open the door and remove the
laundry.
2. Turn the programme selector to
Off ($). The appliance is now
switched off.
3. Turn off the tap.
Note: Not necessary on AquaStop
models.
Notes
■ Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■ Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■ Wipe the rubber seal dry.
■ Leave the door and detergent
drawer open so that any residual
water can evaporate.
■ Always wait until the programme has
ended, as the appliance could still
be locked. Then switch the
appliance on and wait for it to
unlock.
■ If the display panel goes off at the
end of a programme, energy-saving
mode has been activated. Press any
button to activate the panel.
Loading ...
Loading ...
Loading ...