Loading ...
Loading ...
Loading ...
Positioning and connecting en
19
Water inlet
:Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Do not immerse the AquaStop safety
valve in water (it contains an electric
valve).
Notes
■ Only operate the washing machine
using cold mains water.
■ Do not connect the machine to the
mixer tap of an unpressurised hot
water generator.
■ Only use the supply hose provided
or one that has been purchased from
an authorised specialist retailer. Do
not use a supply hose that has
already been used.
■ Do not kink or squeeze the water
supply hose.
■ Do not alter (shorten or cut through)
the water supply hose (or else its
strength can no longer be
guaranteed).
■ Only tighten the screw connections
by hand. If the screw connections are
over-tightened with a tool (such as
pliers), this may damage the thread.
Optimum water pressure in the supply
network
Minimum: 100 kPa (1 bar)
Maximum: 1000 kPa (10 bar)
When the tap is open, the water flow
rate is at least 8 l/min.
If the water pressure is higher than this,
a pressure-reducing valve must be
installed.
Connection
Connect the water supply hose to the
tap (26.4 mm = ¾") and to the
appliance (not necessary on models
with AquaStop as this is permanently
installed):
■ to the tap
– Model: Standard
– Model: AquaSecure
– Model: AquaStop
■ to the appliance
Model: Standard and AquaSecure
Note: Carefully turn on the tap and
check that the connection points are not
leaking. Screwed connections are under
pressure from the water supply pipe.
Loading ...
Loading ...
Loading ...