Loading ...
Loading ...
Loading ...
2 General appliance description
2.4 Standby mode
The standby mode refers to the state of the drawer when the function is temporarily de-
activated, but can be reactivated at any time and without any preparation or lengthy wait-
ing times. Open the drawer and it is ready for operation. The button illuminates dimly
to indicate the appliance is ready for operation. Pressing the button switches the appli-
ance on and the desired operating mode required can be selected.
Operation
Your warming drawer is equipped with a safety shut-off that switches the drawer to the
standby mode after a maximum of 12 hours of continuous operation.
Switching the «standby mode» off
The button is dimmed.
▸ Touch .
– The button illuminates.
– The recommended value illuminates.
The desired operating mode required
can be selected.
2.5 Operating the appliance
The operating panel must be kept clean and dry. Wash and dry your hands. The
buttons will otherwise not react or can come on accidentally.
▸ Touch the button to switch the drawer on.
▸ Touch or repeatedly to set the required temperature and duration or one of the
four preset operating modes (see page 13) with adjustable temperature and duration
settings.
▸ Close the drawer.
– Operation starts; the pilot lamp illuminates if the drawer is closed.
▸ Opening the drawer interrupts operation.
– The pilot lamp flashes if the drawer is open.
– Close the drawer to continue the programme.
▸ When the set duration is up, an acoustic signal is emitted.
– The button is dimmed in the standby mode.
After the operation ends or the button is touched, the interior illumination of the
warming drawer goes out automatically after 5minutes. The interior illumination is
activated again by touching the button or by closing and opening the warming
drawer.
▸ If necessary, switch the appliance off before time: hold the button depressed for 1
second.
– After the button is released, the button is dimmed in the standby mode.
10
Loading ...
Loading ...
Loading ...