Loading ...
Loading ...
Loading ...
9
4. Remove large clumps of lint by hand from the filter and place
lint in a suitable waste container. Remove remaining residue
from the filter by rinsing with water.
5. Reinsert the drain pump filter by turning it clockwise. Make
sure to turn it in as far as it will go, with the filter handle
remaining as close as possible to the vertical position.
6. Replace and close the dispenser drawer. Make sure to insert
both rails simultaneously when replacing the drawer. You will
hear a clicking sound that indicates the rails have engaged. To
ensure proper placement of the drawer, pull out fully. The
drawer should be fully engaged and the rails locked in place.
Make sure the drain hose is secured in the hose clip and
tucked underneath the cutout.
Additional Cleaning
Gently pull back the rubber door seal and clean any stained areas,
soil buildup, or lint with the textured side of an affresh
®
Machine
Cleaning Wipe.
INSTALLATION INSTRUCTIONS
REQUIREMENTS
Tools and Parts
Gather required tools and parts before starting installation.
Tools Needed:
Adjustable or open end
wrenches 1/2″ (13 mm), 5/8″
(16 mm), and 9/16″ (14.3 mm)
Level
Wood block Ruler or measuring tape
Adjustable pliers that
open to 1 9/16″ (39.7 mm)
Flashlight
Bucket
Parts Supplied:
NOTE: All parts supplied for installations are in the washer.
Drain hose with clamp, U-form,
and cable tie
Parts Needed: (if not supplied with washer)
Inlet hoses with flat washers
NOTE: Various inlet hose
options are available; check
your Quick Start Guide for
ordering information.
Loading ...
Loading ...
Loading ...