Loading ...
Loading ...
Loading ...
Maintenance
867
9. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
10. Install the rear combination lamp
assembly to the body of the vehi-
cle.
11. Install the service cover.
Back-up lamp bulb replace-
ment
1. Open the liftgate.
2. Remove the service cover of both
side (drive side and passenger
side).
3. Remove the nuts from rear combi-
nation lamp of both side (drive
side and passenger side).
4.Disconnect the connector from
rear combination lamp of both side
(drive side and passenger side).
OCK077057
OCK077058
OCK077059
Loading ...
Loading ...
Loading ...