Loading ...
Loading ...
Loading ...
16 EN
• Youcanfindthecodeforyourdeviceinthecomplete
brandlistsupplied.
•
Use‘9999’as4-digitcodeincaseyoucannotfindyourbrand
inthecompletebrandlist.Notethatusing‘9999’mayresult
inalongsetup(upto15minutes).
MyTVswitchesOFFinstep4butdoesnotswitchON
againinstep5.
TVsofsomebrands(e.g.Panasonic)onlyswitchONafter
alongpressononeofthedigitbuttons.Afteralongbutton
pressinsetupmodetheremotecontrolwillstarttryingto
improvethebutton(seechapter2.3.3)insteadofswitching
ONtheTV.
• Inthiscase,switchONtheTVmanuallyorusethe
originalremotecontrolforthis.Continuewithstep6.
Aftersuccessfullycompletingsetup,theremotecontrol
willswitchONtheTVwithalongbuttonpressonone
ofthedigitbuttons,justasyouroriginalremotecontrol.
Aftersetup,notallbuttonsworkasexpected.
• Tryimprovingthe
button(s)
.Seechapter2.3.3.
HowdoIsetuptheremotecontrolforcombodevices
(TV/VCR,TV/DVD,DVD/VCR,etc)?
Somecombodevicesrequireyoutosetuptwodifferent
deviceselectionbuttonstocontrolbothpartsofthecombo
device.Forexample,ifyouhaveaTV/DVDcombo,youmight
needtosetuptheremotecontrolforbothTVandDVDto
operateyourTV/DVDcombo.
Operation
Theremotecontroldoesnotwakeupanymore.
Batteryleveltooloworbatterylifetimecametoanend.
• Replacethebatteries.Seechapter2.1.
ThedeviceIwanttooperatedoesnotrespondatall/does
notrespondtoallofthebuttoncommands.
• Checkifthebuttonsyoupressareavailableonthe
originalremotecontrolofthedevice.
• Tryimproving
buttons
.Seechapter2.3.3.
• Trylearningbuttonfunctionsfromtheoriginalremote
control.Seechapter
3.3.
Wrongcodeselectedduringsetup.
• Setuptheremotecontrolagainforthedevice.Always
testifthedeviceresponds,beforeleavingsetupmode.
SRP6207_27_IFU.indd 16 01-02-12 19:25
Loading ...
Loading ...
Loading ...