Loading ...
Loading ...
Loading ...
32
REPLACING THE OVEN LIGHTS
WARNING: Ensure the appliance is switched off before replacing the lamp/s to avoid
the possibility of electric shock.
■ Let the oven cavity and the heating elements to cool down.
■ Switch off the electrical supply.
LEFT LAMP (BOTTOM MAIN OVEN ONLY)
■ Remove the left wire rack and the side catalytic panel by unscrewing the
xing screws (see chapter USE AND CARE at page 14).
■ Press down from the top the protective cover “A” (g. 26) and remove it by
rotating on the lower side.
IMPORTANT: never use screwdrivers or other utensils to remove the cover “A”. This
could damage the enamel of the oven or the lampholder. Operate only by hands.
■ Replace the halogen lamp “B” with a new one suitable for high temperatures having
the following specications: 220-240V or 230-240V, 50 Hz and same power (check
watt power as stamped in the bulb itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination
from your ngers can cause premature failure. Always use a clean cloth or gloves.
■ Ret the protective cover “A” operating in reverse order.
ATTENTION: the notch in the inner edge of the cover must be oriented toward the lamp.
■ Assemble the side catalytic panel and the left wire rack.
TOP RIGHT LAMP (BOTH OVENS):
■ Remove the protective cover “C” (g. 26).
■ Replace the halogen lamp “B” with a new
one suitable for high temperatures having the
following specications 220-240V or 230-240V,
50 Hz and same power (check watt power as
stamped in the bulb itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with
bare hands; contamination from your ngers can cause
premature failure. Always use a clean cloth or gloves.
■ Ret the protective cover C.
NOTE: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
WRONG
CORRECT
Figure 26
Loading ...
Loading ...
Loading ...