Loading ...
Loading ...
Loading ...
410 MULTIMEDIA
Customer Programmable Features —
Uconnect 4C/4C NAV Settings
Uconnect 4C/4C NAV Buttons On The Touchscreen And
Buttons On The Faceplate
Press the Apps button, then press the
Settings button on the touchscreen to
display the menu setting screen. In this mode
the Uconnect system allows you to access all of
the available programmable features.
NOTE:
Only one touchscreen area may be selected
at a time.
Depending on the vehicles options, feature
settings may vary.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting option until a check-mark
appears next to the setting, showing that setting
has been selected. Once the setting is
complete, either press the Back Arrow button
on the touchscreen to return to the previous
menu, or press the X button on the touchscreen
to close out of the settings screen. Pressing the
Up or Down Arrow button on the right side of the
screen will allow you to toggle up or down
through the available settings.
KeySense
The vehicle’s KeySense settings are protected
by a unique four digit PIN, which the vehicle
owner creates when accessing the specific
settings for the first time. This four digit PIN can
only be reset by an authorized dealer.
After pressing the KeySense button on the
touchscreen, and entering the KeySense PIN,
the following settings will be available:
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
Setting Name Selectable Options
Forward Collision Sensitivity — If
Equipped
Near Med
Far
Forward Collision Warning Active
Braking — If Equipped
On Off
NOTE:
When the “Forward Collision Warning Active Braking” feature is selected, the Advanced Brake Assist (ABA) applies additional brake pressure when
the driver requests insufficient brake pressure to avoid a potential frontal collision. The ABA system becomes active at 5 mph (8 km/h).
20_RU_OM_EN_USC_t.book Page 410
Loading ...
Loading ...
Loading ...