Loading ...
Loading ...
Loading ...
A
B
3
9
Lowes.com/harborbreeze
2. Remove the three Phillips-head screws preassembled
near coupling (E) on the motor housing (H). Guide
power wires from motor housing (H) through the base
of the canopy (B), then attach canopy (B) to motor
housing (H) with previously removed screws. Tighten
securely.
3. Raise assembly and temporarily place one side of
canopy (B) onto hook of mounting bracket (A). This
will leave hands free for the wiring process.
1. Press out on the inner edges of the canopy cover (C)
from inside the canopy (B) until it releases from the
canopy (B).
Note: Flushmount installation will not use canopy cover
(C), downrod assembly (D), clevin pin (O), hairpin clip (P)
or coupling screws.
FLUSHMOUNT INSTRUCTIONS
B
E
H
2
Screw
1
B
C
Proceed to WIRING INSTRUCTIONS on next page.
Loading ...
Loading ...
Loading ...