Loading ...
Loading ...
Loading ...
20
SETTING THE FUNCTIONS
SETTING THE DISPENSER LOCK
SETTING THE DOOR ALARM
Press the DOOR ALARM/LOCK button once to acti-
vate and deactivate the door alarm function.
NOTE: Contact your local service center if the alarm
continues to sound after the doors are closed.
RESETTING THE FILTER INDICATOR
NOTE: It is recommended that the filter be replaced
when the indicator light on the front dispenser reaches
0. If the water or ice cube taste starts to deteriorates.
ACTIVATING ICE PLUS
The ICE PLUS function
runs the freezer
compartment at the
coldest setting for a 24-
hour period to increase
icemaking by up to about
20%, and then turns off
automatically.
NOTE: Press the button again to deactivate the ICE
PLUS function.
ACTIVATING FRESH AIR FILTER
DIAGNOSTIC FAILURE DETECTION
The diagnostic function automatically detects problems with your refrigerator, and a diagnostic code will appear in
the display. NOTE: If a diagnostic code appears in the display during use, note the code and call your Service Center.
Refer to the Warranty Card to obtain the telephone number of the Service Center near you.
USING YOUR REFRIGERATOR
The FRESH AIR FILTER
has two settings, Auto ad
MAX. In Auto mode, the
Air Filter will cycle on and
off in increments of ten
minutes on and 110
minutes off .
If set to the MAX mode, the Air Filter will stay on
continuously for four hours, cycling on and off in incre-
ments of ten minutes on and five minutes off .
After four hours, the Air Filter will switch to Auto mode.
ţ"VUPNPEFJTUIFEFGBVMUNPEF
ţ1SFTTUIF"JS'JMUFSCVUUPOPODFGPS."9NPEF
When the REPLACE icon turns on, the air filter needs to
be replaced. After replacing the air filter, press and hold
the Air Filter button for 3 seconds to turn the icon light
off . It is recommended to change the air filter approxi-
mately every six months.
Press and hold the
DOOR ALARM / LOCK
button for three seconds
to lock the dispenser
and all of the other
control panel functions.
Press and hold again for
3 seconds to unlock.
The DOOR ALARM /
LOCK button also
controls the door alarm
that sounds three times
in 30-second intervals
when a compartment
door is left open for
more than 60 seconds.
The alarm stops sound-
ing when the door is
closed.
Press and hold the
LIGHT / WATER FILTER
button for more than 3
seconds to reset the
filter indicator after the
water filter has been
replaced.
Press by 3 seconds the
ICE TYPE / ICE PLUS
button once to activate
the ICE PLUS function.
The ICE PLUS icon on
the display panel will
illuminate when
activated.
Loading ...
Loading ...
Loading ...