Loading ...
Loading ...
Loading ...
English 31
Before you start
Operations
Control panel
01
02
03 04 05 06
08
09
07
01 Course Selector Turn the dial to select a course.
02 Display
The display shows current course information and estimated time
remaining, or an information code when a problem occurs.
03 Temp. Press to change the water temperature for the current course.
04 Spin
Press to change the spinning speed for the current course.
• Rinse Hold (No indicator): The nal rinse cycle is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin cycle.
• No Spin
: The drum does not spin after the nal drain cycle.
• Spin Only : To run the Spin Only cycle, press Spin for 3
seconds. When the cycle time and spinning speed appear, press
Spin repeatedly until a desired spinning speed is selected. Then,
press Start/Pause to start the cycle. The spinning time depends
on the selected cycle.
05 Dry Level Press this button to select proper drying option.
06 Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to nish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
WD80M4B53JW_03881C-01_EN.indd 31 2018/3/8 9:43:18
Loading ...
Loading ...
Loading ...