Loading ...
Loading ...
Loading ...
7
Before Using Cooktop
Induction Cookware
Induction cooking utilizes magnetic power which reacts with iron in the base of cookware, instantly
transforming the pot or pan into the heat source. The heat stops when the cookware is removed.
Your cookware MUST have a magnetic layer of steel for your induction cooktop to operate properly.
The cookware should have a at, heavy magnetic bottom and straight sides with a diameter of 5” (13
cm) to 12” (31 cm) to accommodate the various sized elements. The induction cookware should be in
good condition and free from excessive dents on the bottom to provide maximum performance and
convenience.
All Viking cookware is induction friendly, as are most other high-end brands of stainless steel and
enamel cookware. Most induction cookware will be suitable for your induction cooktop if a magnet
adheres to the bottom surface.
• Cookware that is NOT suitable for your induction cooktop includes pottery, glass, aluminum, copper,
bronze, and any type of cookware with a footed base.
Hot Surface Indicator Lights
The cooktop has hot surface indicator lights. They are located to the bottom left of each burner. The hot
surface indicator light will glow red when the corresponding element is turned on. The light will remain
on until the corresponding element has cooled to a safe temperature.
12”
(30.5 cm) max.
5”
(12.7 cm) min.
Operating Single Elements
All burners have variable controls. Turn the knob counter-clockwise one click left to achieve the
lowest setting. Continue turning counter-clockwise to the LOW,
MED, or HI Settings. The nal setting once you have turned the knob counter-clockwise to its max
is the HI setting.
Operating Double Elements
(Electric models only)
All burners have variable controls. Turn the knob counter- clockwise one click left to achieve the
Highest setting for the center element. Continue turning clockwise through the MED and down to
the
LOW setting.
Continuing to turn counter-clockwise will bring you into the LOW setting with both elements now
activated. From here, continue turning counter-clockwise to activate the MED, and HI settings of
both elements. The nal setting once you have turned the knob counter-clockwise to its max is
the HI setting with both elements activated.
Operating Triple Elements
(Electric models only)
All burners have variable controls. Turn the knob counter-clockwise one click left to achieve the
highest setting for the center single element. Continue turning counter-clockwise through the
MED and down to the LOW setting.
Continuing to turn counter-clockwise will bring you into the HI setting for the two inner elements
combined. From here, continue turning counter-clockwise to go into the MED, and LOW settings
of both elements.
Finally,continuing to turn counter-clockwise will bring you into the HI setting for all three
elements combined. Continue turning counter-clockwise to turn the elements to the MED and
LOW setting.
Loading ...
Loading ...
Loading ...