Loading ...
Loading ...
Loading ...
9 101-800-798-7398 sharkclean.com
USING THE
MULTIFLEX™ WAND
WARNING:
This
vacuum does not stand
up on its own. Using
the unit when it lacks
stability may result
in personal injury. To
place in MultiFLEX
Storage mode, press
the MultiFLEX Wand
button and gently fold
the handheld vacuum
down toward the floor
nozzle.
TIP: The carry handle
located below the
handheld vacuum can also
be used to assist in taking
the vacuum in and out of
MultiFLEX Storage mode.
NOTE: Before vacuuming
your delicate area rugs
or carpet, refer to the rug
manufacturer’s recommended
cleaning instructions.
1 To start vacuuming, press the Power button, then recline
the wand to start the brushrolls.
USING THE MULTIFLEX WAND
To easily access hard-to-reach areas under furniture without
having to bend down, press the MultiFLEX Wand button to
position the wand to a lower angle.
MULTIFLEX STORAGE
1 Press the MultiFLEX Wand Lock Release button and gently
fold the handheld vacuum forward toward the floor nozzle
until it locks in storage mode. Use the handle to carry the
vacuum to its storage location.
To take the vacuum out of storage mode, press the MultiFLEX
Wand Lock Release button while lifting up the handheld
vacuum. When straightened, the wand will lock in place.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushrolls are on and
working as they should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
No Light
The brushrolls are off
because the vacuum is off,
or the nozzle is not correctly
connected to the wand or
handheld vacuum.
USING SMART RESPONSE™
TECHNOLOGY
CHOOSING A SUCTION SETTING
There are 2 suction settings:
EXTEND RUNTIME – For everyday
cleaning.
MAX POWER – Maximum power for heavy-
duty cleaning.
NOTE: The MAX POWER setting drains the ION Power
Pack Batteries faster than extend runtime setting.
NOTE: For deep carpet cleaning per ASTM F608, use
Carpet and Max Power settings.
SMART RESPONSE TECHNOLOGY
The Smart Response Technology lets you select the ideal power setting and brushroll speed for
each cleaning job.
CHOOSING A SURFACE SETTING
CARPET setting – For cleaning high pile
carpets. Both brushrolls spin faster, working
together to pick up debris below the surface
of your carpets.
FLOOR setting – For cleaning bare floors
and area rugs. The brushroll and the Soft
Roller both spin together slowly to gently clean
hard floors and delicate rugs. The Soft Roller
traps fine dust and large particles, while the
brushroll directs that debris to the suction
channel.
USAGE
STORAGE
Loading ...
Loading ...
Loading ...