Loading ...
Loading ...
Loading ...
17 181-800-798-7398 sharkclean.com
MAINTAINING YOUR VACUUM - CONT�
MAINTAINING THE BRUSHROLL
1 Open the brushroll garage by sliding both release buttons
away from you, toward the back of the floor nozzle, then
lifting off the garage lid. Remove any string, hair, or debris
that may be wrapped around the brushroll by running
scissors or the lower corner of the garage lid along the
guide on the brushroll.
2 Close the brushroll garage by inserting the tabs on the lid
into the slots on the floor nozzle, then pressing down on the
lid, above the headlights, until both sides click into place.
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
remove the ION Power
Pack before servicing.
WARNING: When
cleaning brushroll, be
sure to not cut anything
other than hair, string,
fibers, or other debris.
TIP: Ensure the brushroll
garage is completely
sealed and closed before
using.
NOTE: Heavy usage over
time may require minimal
upkeep in order to maintain
your vacuum’s appearance.
STEP 1 STEP 2
MAINTAINING THE SOFT ROLLER
1
Open the brushroll garage by sliding both
release buttons away from you, toward the
back of the floor nozzle, then lifting off the
brushroll garage lid. Lift out the Soft Roller
by the tab on the right side. Clean off any
string, carpet fibers, or hair that may be
wrapped around the Soft Roller, and remove
debris from the roller housing.
2
Wash the Soft Roller as needed, using only
water. Air-dry completely for at least 24 hours
before returning it to the brushroll garage
.
3 Reinsert the Soft Roller by sliding it into
the front of the floor nozzle until it clicks
into place. Close the brushroll garage by
inserting the tabs on the garage lid into
the slots on the floor nozzle, then pressing
down on the lid, above the headlights, until
both sides click into place.
CHECKING FOR BLOCKAGES:
Handheld, Wand, and Floor Nozzle
1 Turn off vacuum and remove ION Power
Pack.
2 Remove the wand from the handheld
vacuum and check all intake openings to
the dust cup.
3 Remove the floor nozzle from the wand
and check the wand for blockages.
4 Tilt neck of floor nozzle back to straighten
the airway to remove blockages.
Loading ...
Loading ...
Loading ...