Loading ...
Loading ...
Loading ...
6|COFFEE MAKER INSTALLATION GUIDE
Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be
installed in a column and the column must be firmly fixed to the wall with commercially available brackets.
IMPORTANT!
●
All installation or maintenance operations must be performed with the appliance disconnected
from the mains electricity supply.
●
Kitchen furniture in direct contact with the appliance must be heat resistant 65°C min.
●
To guarantee correct ventilation, leave a gap at the bottom of the cabinet
(see measurements below).
6BCABINETRY DIMENSIONS (480mm CAVITY TRIM KIT)
TOPSIDE
Electrical supply
o
Lower
Trim kit
M
J
I
Lk
n
CABINETRY DIMENSIONS
EB60 MODELS
mm
I
Minimum inside width of cavity 560
J
Overall width of cabinetry 600
K
Minimum inside height of cavity 470
L
Overall height of cabinetry 480
M
Minimum inside depth of cavity 545
n
Ventilation air vent 50
o
Height of trim kit
20
PROUD INSTALL
FLUSH INSTALL
16–20mm
2mm
16–20mm
20mm
20mm
Loading ...
Loading ...
Loading ...