Loading ...
Loading ...
Loading ...
2|COFFEE MAKER INSTALLATION GUIDE
IMPORTANT SAFETY INSTRUCTIONS!
Installation
Checking for transport damage
After removing the packaging, make sure the product is complete and undamaged and that all
accessories are present. Do not use the appliance if it is visibly damaged. Contact Customer Care.
IMPORTANT!
Installation must be performed by a qualified professional in compliance with legislation
in force in the country of installation.
Never install the appliance in rooms where the temperature may drop to 0°C or lower.
This appliance can be installed over a built-in oven if the latter is fitted with a cooling fan
at the rear (maximum microwave power: 3 kW).
Ensure the appliance is fully secured. Failure to do so may result in an unstable product,
which may cause damage or injury.
Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.
Make sure that the power supply cord is located so that it will not be stepped on, tripped
over or otherwise subject to damage or stress.
Connecting the appliance
This appliance should be connected to a circuit which incorporates an isolation switch providing
full disconnection from the power supply.
DANGER!
Check that the mains power supply voltage corresponds to the value indicated on the rating
plate on the bottom of the appliance.
Connect the appliance to an efficiently earthed and correctly installed socket with a minimum
current rating of 10A only.
If the power socket does not match the plug on the appliance, have the socket replaced
with a suitable type by a qualified professional.
To comply with safety directives, an omnipolar switch with a minimum contact distance
of 3mm must be installed.
Do not use multiple sockets or extensions.
Safety cutout devices must be included in the mains power supply in compliance with
the installation regulations in the country concerned.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended
to come into contact with food.
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country,
please go to our website fisherpaykel.com or contact your local Fisher & Paykel dealer.
1SAFETY AND WARNINGS
WARNING!
Cut Hazard
Take care – some edges are sharp.
Failure to use caution could result in injury or cuts.
MAINTENANCE
Do not repair or replace any part of the appliance or attempt any servicing unless
specifically recommended in this user guide.
We recommend that you contact Customer Care to arrange service. See your ‘Service
and warranty’ booklet for contact details.
To prevent damage to the appliance do not use alkaline cleaning agents when cleaning,
use a soft cloth and a mild detergent.
If the plug or power cable is damaged, it must be replaced by an authorised technical
only to avoid all risk.
Appliances with removable cord: avoid splashes of water on the power cord connector
or socket at the back of the appliance.
Do not place weight onto the coffee machine when it is out of the cabinet.
Do not rest containers with liquids or inflammable or corrosive materials on top of
the appliance.
Do not rest large objects which could obstruct movement or unstable objects on
the appliance.
Never turn off the machine during descaling.
The first time you use the appliance, or if it is not used for more than three or four days, rinse
all removable accessories which may come into contact with water or milk with hot water.
If the appliance is not used for more than three or four days, prior to re-using the
appliance, rinse the water circuit as described in this manual.
You should diligently carry out automatic cleaning and guided maintenance when
prompted by the appliance through the display as described in this manual.
Choking hazard. The appliance might contain small parts. Some of those small partsmight
be required to get disassembled during cleaning and maintenance operations.
Handle with care and keep small parts out of reach of children.
Cleaning and user maintenance shall not be made by children without supervision.
Disposal
The appliance must not be disposed of with household waste, but taken to an authorised
waste separation and recycling centre.
Operational
Customise the water hardness as soon as possible following the instructions in the
‘Water hardness’ section.
Keep hands clear of the coffee spout when in operation. The temperature of liquid that
flows from the spout could result in burns.
During the rinse cycle hot water flows from the spout. Please keep hands clear of the
spout to avoid the risk of burns.
This appliance produces hot water and steam may form while it is in operation.
Models with glass surfaces: do not use the appliance if the surface is cracked.
Do not use the appliance when it is out the cabinet. Make sure the appliance is turned off
before extracting it. The only exception is adjusting the coffee mill which must be done
with the machine extracted (see section ‘Adjusting the coffee mill’).
Note: use original or manufacturer recommended accessories and spare parts only.
Loading ...
Loading ...
Loading ...