CHRYSLER 2008 ASPEN User Manual

Loading ...

Horn Chirp Programming

The horn chirp feature will be activated when shipped

from the assembly plants. If desired, this feature can be

disabled by following these procedures:

•

For vehicles equipped with the Electronic Vehicle

Information Center (EVIC), refer to “Personal Settings

(Customer Programmable Features)” under “Over-

head Console with Electronic Vehicle Information

Center (EVIC) – If Equipped” in Section 3.

•

For vehicles not equipped with the EVIC:

1. Press and hold the LOCK button on the key fob.

2. After holding the LOCK button for four seconds, also

press the PANIC button within six seconds.

3. Release both buttons at the same time.

4. To reactivate this feature, repeat the above steps.

5. Test the horn chirp feature while outside of the vehicle

by pressing the LOCK button on the key fob with the

ignition in the OFF position and the key removed.

NOTE: Pressing the LOCK button on the key fob while

you are inside the vehicle will activate the Security

Alarm. Opening a door with the SecurityAlarm activated

will cause the alarm to sound. Press the UNLOCK button

to deactivate the Security Alarm.

6. If the desired programming was not achieved or to

reactivate this feature, repeat the above steps.

Flash Lights with Lock Programming

•