Loading ...
Loading ...
Loading ...
TRANSMISSION OIL
Always check and change the transmission oil at the intervals outlined in the
Periodic Maintenance Interval section of this manual. See the Fluid
Recommendation table for capacities and plug torques. Maintain the oil level at
the bottom of the fill plug hole. The fill plug is located on the right side of the ATV
behind the footwell. The drain plug is located on the bottom rear side of the
gearcase.
OIL CHECK
1. Remove the footwell.
2. Remove the fill plug
q
. Check the
oil level.
3. Slowly add the recommended fluid
as needed to bring the level to the
bottom of the fill hole threads.
4. Reinstall the fill plug. Torque to
specification.
5. Reinstall the footwell.
TORQUE
Fill Plug:
12 in-lbs (16 N·m)
OIL CHANGE
1. Place a drain pan under the gearcase. Remove the drain plug
w
. Allow the
oil to drain completely.
2. Clean and reinstall the drain plug. Torque to specification.
3. Remove the fill plug. Slowly add the
proper amount of the recommended
oil.
4. Reinstall the fill plug. Torque to
specification.
5. Check for leaks.
6. Reinstall the footwell.
7. Dispose of used oil properly.
121
MAINTENANCE
Loading ...
Loading ...
Loading ...