Loading ...
Loading ...
Loading ...
LUBRICATION GUIDE
Check and lubricate all components at the intervals outlined in the Periodic
Maintenance Chart. Items not listed in the chart should be lubricated at the
General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
ITEM LUBE CAPACITY AT FLUID
CHANGE
INSPECTION
PROCEDURE
Engine Oil PS-4 5W-50 4-Cycle
Oil
2 qt. (1.9 L) Maintain level in safe
range on dipstick.
Brake Fluid DOT 4 Brake Fluid - Maintain level
between fill lines.
Transmission Oil AGL Gearcase
Lubricant &
Transmission Fluid
1 qt. (0.95 L) Maintain level at
bottom of fill hole
threads.
Demand Drive (Front
Gearcase)
Demand Drive 9.3 fl oz. (275 ml) Maintain level at
bottom of fill hole
threads.
Front Prop Shaft U-Joint Grease - Grease fittings (3
pumps maximum)
every 50 hours, or 500
miles (whichever
comes first), before
long periods of
storage, or after
pressure washing or
submerging.
116
MAINTENANCE
Loading ...
Loading ...
Loading ...