Loading ...
Loading ...
Loading ...
8 9
EN
cappuccino to be prepared (g. 23). Never exceed the MAX
level (corresponding to about 750 ml) marked on the con-
tainer. You should ideally use skimmed or semi-skimmed
milk at refrigerator temperature (about 5°C).
• Makesuretheintaketubeiscorrectlyinsertedintherubber
washer (g. 24) then replace the milk container lid.
• Positionthefrothedmilkregulator(C1)betweenthewords
CAPPUCCINO and CAFFELATTE printed on the milk container
lid.
The quantity of froth can be adjusted by moving the regu-
lator towards the word CAFFELATTE for a denser froth. Mov-
ing it towards the word CAPPUCCINO obtains a less dense
froth.
• Removethehot water spout (g 6) and attach the milk
container to the nozzle (g. 25).
• Positionthemilkspoutasshowning.26andthenplacea
suciently large cup under the coee and milk spouts.
• Pressthe icon (g. B12). “CAPPUCCINO...” is displayed
and after a few seconds, frothed milk ows out of the milk
spout into the cup below. (La fuoriuscita del latte si inter-
rompe automaticamente). (Delivery stops automatically).
• Theappliancedeliverscoee.
• Thecappuccinoisnowready.Sweetentotasteand,ifde-
sired, sprinkle the froth with a little cocoa powder.
NOTE 1: While making cappuccino, the ow of frothed milk or
coee can be interrupted by pressing the icon (B12).
NOTE 2: If the milk in the container nishes while delivering
frothed milk, remove the container and add milk. Reattach and
press the (B12) to request a cappuccino again.
NOTE 3: To ensure the complete cleanliness and hygiene of the
milk frother, always clean the circuits in the milk container lid
after making cappuccino.
“PRESS CLEAN!” ashes on the display.
• Placearecipientunderthemilkspout(g.26).
• PresstheCLEANbuttononthelid(C3)andholddownforat
least 5 seconds (g. 26) to start the cleaning function.
The appliance displays the message “CLEANING!” above a
progressive bar.
You should not release the CLEAN button until the bar is
complete indicating that cleaning is concluded.
When the CLEAN button is released, the function stops.
After cleaning, remove the milk container and place in the
refrigerator.
The milk should not be left out of the refrigerator for more
than 15 minutes.
NOTE 4: To change the quantity of coee or frothed milk the ap-
pliance delivers automatically into the cup, proceed as described
in the section “Changing the quantity of coee and milk for cap-
puccino”.
CHANGING THE QUANTITY OF COF
FEE AND MILK FOR CAPPUCCINO
The appliance is set by default to automatically deliver a normal
cappuccino.
To change these quantities, proceed as follows:
Changing the quantity of milk
• Fillthecontainerwithmilkuptothemaximumlevelindi-
cated on the container.
• PresstheMENUicon(B2)toenterthemenu(g.15),then
press the icons (B7) and (B8) (g. 2) until “PRO-
GRAM CAPPUCCINO” is displayed.
• PresstheOKicon(B9)toconrm.“PROGRAMMILK”isdis-
played.
• PresstheOKicon(B9)again.
• Selectthequantityofmilkrequiredbypressingthe
icons (B7) and (B8). The progress bar shows the quantity of
milk selected.
• PresstheOKicon(B9)toconrm(orthe icon (B6) to
cancel the operation.
• Pressthe icon (B6) (g. 18) twice to exit the menu.
Changing the quantity of coee
• PresstheMENUicon(B2)toenterthemenu(g.15),then
press the icons (B7) and (B8) (g. 2) until “PRO-
GRAM CAPPUCCINO” is displayed.
• PresstheOKicon(B9)toconrmthenthe icons
(B7 and (B8) (g. 2) until “COFFEE FOR CAPPUCC.” is dis-
played.
• PresstheOKicon(B9)again.
• Select the quantity of coee required by pressing the
icons (B7) and (B8). The progress bar shows the
quantity of coee selected.
• PresstheOKicon(B9)toconrm(orthe icon (B6) to
cancel the operation.
• Pressthe icon (B6) (g. 18) twice to exit the menu.
NO froth
“Denser” froth
frothed milk regulator
“Less dense” froth
Loading ...
Loading ...
Loading ...