Loading ...
Loading ...
Loading ...
8
EN
ADJUSTING THE COFFEE MILL
The coee mill is preset in the factory and should not require
adjusting. However, if after making the rst few coees you nd
that delivery is either too fast or too slow (a drop at a time), this
can be corrected by adjusting the grinding adjustment knob (g.
14).
Important! The grinding adjustment knob must only
be turned when the coee mill is in operation.
For slower delivery and creamier coee, turn one click anticlock-
wise (ner pre-ground coee).
For faster delivery (not a drop at a time), turn one click clockwise
(coarser pre-ground coee).
PREPARING COFFEE WITH PRE
GROUND COFFEE INSTEAD OF
BEANS
• Pressthe (B4) icon (g. 8) and select the pre-ground
coee function.
• Extractthemachinebypullingitoutwardsusingthehan-
dles (g. 7).
• Liftthecentrallid,placeonemeasureofpre-groundcoee
in the funnel (g. 19), push the appliance in then proceed
as described in the section “Making coee using coee
beans”.
N.B.: You can make just one coee at a time by pressing the
icon (B10) (g. 12).
• Afterusingthemachinewithpre-groundcoee,togoback
to making coee using beans, deactivate the pre-ground
coee function by pressing the icon (B4) (g. 8).
NOTE 1: Never introduce pre-ground coee when the machine is
o or it could spread through the inside of the appliance.
NOTE 2: Never add more than 1 measure, otherwise the appli-
ance will not make the coee.
NOTE 3: Use the measure provided only.
NOTE 4: Introduce only pre-ground coee for espresso coee
machines into the funnel.
NOTE 5: If more than one measure of pre-ground coee is used
and the funnel clogs, push the coee down with a knife (g. 21)
then remove and clean the brewing unit and machine as de-
scribed in the “Cleaning the brewing unit” section.
DELIVERING HOT WATER
• Alwaysmakesuretheapplianceisready.
• Turnthecappuccinomakeroutwardsandplaceacontainer
underneath (g. 6).
• Pressthe icon (B13) (g. 20). The appliance displays:
“HOT WATER PRESS OK”. Press the OK icon (B9) again and
hot water is delivered from the cappuccino maker into the
container underneath. (You should not deliver hot water
for more than 2 minutes at a time). To interrupt, press the
icon (B13) or the icon (B6). The appliance stops
delivery once the set quantity is reached.
CHANGING THE QUANTITY OF HOT
WATER
The machine is set by default to automatically delivery 200 ml
of hot water.
To change these quantities, proceed as follows:
• Placeacontainerunderneaththecappuccinomaker(g.5).
• PresstheMENU(B2)toenterthemenu(g.15)orpressthe
icons (B7) and (B8) (g. 2) until “PROGRAM HOT
WATER” is displayed.
• PresstheOKicon(B9)toconrm.
• Select the required quantity of water by pressing the
icons (B7) and (B8). The progress bar shows the
quantity of water selected.
• PresstheOKicon(B9)toconrm(orthe icon (B6) to
cancel the operation.
• Pressthe icon (B6) (g. 18) twice to exit the menu.
• Theapplianceisnowreprogrammedwiththenewsettings
and is ready.
MAKING CAPPUCCINO
N.B.: Set the quantity of coee you want to use to make
the cappuccino in the “Program cappuccino” function in the
menu.
• Selectthetasteofthecoeeyouwanttousetomakethe
cappuccino by pressing the icon (B4).
• Removethelidofthemilkcontainer.
• Fillthecontainerwithabout100gramsofmilkforeach
Loading ...
Loading ...
Loading ...