Loading ...
Loading ...
Loading ...
12 13
EN
Changing coee temperature
To change coee temperature, proceed as follows:
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until “TEMPERATURE” is dis-
played.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) to select the required
coee temperature from low, medium and high.
• PresstheOKbutton(B9)toconrmthetemperatureselect-
ed.
• Pressthe icon (B6) to exit the menu.
Setting water hardness
The operating period can be extended if required, making desca-
ling less frequent by programming the machine on the basis of
the real lime content in the water used.
Proceed as follows:
• removethe“TotalHardnessTest”strip(attachedtopage2)
from its packaging then dip it fully in the water for a few
seconds,
Then remove and wait about 30 seconds (until it changes
colour and forms red squares).
• turn the appliance on by pressing the ON/OFF/stand-by
button (A7).
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until “WATER HARDNESS” is dis-
played.
• PresstheOKicon(B9).
• Pressthe icons (B7) and (B8) until the number co-
incides with the number of red squares on the test strip (for
example, if there are 3 red squares on the test strip, select
the message “WATER HARDNESS 3”
• PresstheOKicon(B9)toconrm.
The coee maker is now programmed to provide the des-
cale warning when actually necessary.
Programming coee
For instructions on programming coee, see the “CHANGING THE
QUANTITY OF COFFEE IN THE CUP” section.
Programming cappuccino
For instructions on programming cappuccino, see the section
“CHANGING THE QUANTITY OF MILK AND COFFEE FOR CAPPUC-
CINO”.
Programming the jug
This function is not supported by this model.
Programming water
For instructions, see the “CHANGING THE QUANTITY OF HOT WA-
TER” section.
Descaling
Important! Descaler contains acids.
Respect the safety warnings provided by the manufacturer and
given on the descaler pack.
N.B.: Use the descaler recommended by the manufac-
turer only.
Use of other descalers invalidates the guarantee.
Failure to descale the appliance as described also invalidates the
guarantee.
When “PLEASE DESCALE !” is displayed, the machine requires
descaling.
Proceed as follows:
• makesurethemachineisready;
• PresstheMENUicon(B2)toenterthemenuandthenthe
icons (B7) and (B8) until “DESCALE” is displayed.
• PresstheOKicon(B9).
The message “ADD DESCALER PLEASE CONFIRM” is dis-
played.
• Emptythetankofwater,pourthecontentsofthedescaler
bottle into the tank respecting the instructions given on the
descaler pack, then add water.
Position a container with a capacity of about 2 litres under
the hot water spout.
• PresstheOKicon(B9).Descalerowsoutofthehotwater
spout into the container below.
The appliance displays: “DESCALING”.
• Thedescaleprogrammeautomaticallyperformsaseriesof
deliveries and pauses.
• Afterabout30minutes“DESCALECOMPLETEPLEASECON-
FIRM” is displayed.
• PresstheOKicon(B9).“RINSINGFILLTANK”isdisplayed.
• Emptythewatertank,rinsetoeliminatedescalerresidues,
then ll with clean water.
• Replacethetankfullofcleanwater.
“RINSING PLEASE CONFIRM” is displayed again.
• PresstheOKicon(B9)again.
Hot water ows out of the spout into the container below
and “RINSING” is displayed.
• Wait until“RINSING COMPLETE PLEASE CONFIRM” is dis-
played.
• PresstheOKicon(B9).
Loading ...
Loading ...
Loading ...