Loading ...
Loading ...
Loading ...
- 30 -
MAINTENANCE
REMOVING & REPLACING THE
LIFT-OFF OVEN DOOR
To remove the door:
Step. 1
Fully open the door.
Step. 2
Pull the hinge locks down
toward (Fig.1) the door frame,
to the unlocked position.
Step. 3
Firmly grasp both sides of the door at the top.
Step. 4
Close door to the door removal
position, which is approximately 5
degrees.
(refer to the Fig.2)
Step. 5
Lift door up and out until the hinge arm is clear of the slot.
To replace the door:
Step. 1
Firmly grasp both sides
of the door at the top.
Step. 2
With the door at the
same angle as the
removal position, seat
the indentation of the
hinge arm into the
bottom edge of the
hinge slot. The notch in
the hinge arm must be
fully seated into the bottom of the slot.
Step. 3
Fully open the door. If the door will not fully open, the
indentation is not seated correctly in the bottom edge of the
slot.
Step. 4
Push the hinge locks up against the
front frame of the oven cavity to
the locked position.
Step. 5
Close the oven door.
Read the following recommendations:
1. Do not close the oven door until all the oven racks are
fully in place.
2. Do not hit the glass with pots, pans, or any other object.
3. Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
• Most oven doors contain glass that can break.
Door Care Instructions
Slot
Hinge
lock
Lock
Unlock
about 5°
Hinge arm
Indentation
Bottom
edge of
slot
Hinge arm
Hinge lock
<Fig.1>
<Fig.2>
CAUTION
• Be careful when removing and lifting the
door.
• DO NOT lift the door by the handle.
- The door is very heavy.
Loading ...
Loading ...
Loading ...