Loading ...
Loading ...
Loading ...
- 15 -
ENGLISH
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Owner’s manual.
CONTROL PANEL FEATURES
INFORMATION
WARM PAD: Press to keep cooked foods warm.
See the how to set the oven for warming section.
PROOF PAD: Press to select a warm environment
useful for rising yeast-leavened products.
BAKE PAD: Press to select the bake function.
BROIL PAD: Press to select the broil function.
NUMBER PADS: Use to set any function requiring
numbers such as the time of day on the clock, the
timer, the oven temperature, the start time and
length of operation for timed baking.
START PAD: Must be pressed to start any cooking
or cleaning function.
CLEAR OFF PAD: Press to cancel all oven
operations except the clock and timer.
CLOCK PAD: Press before setting the time of day.
TIMER ON/OFF PAD: Press to select the timer
feature.
COOK TIME PAD: Press and then use the number
pads to set the amount of time you want your food
to cook. The oven will shut off when the cooking
time has run out.
START TIME PAD: Use along with BAKE, CONV.
BAKE, CONV. ROAST, COOK TIME and SELF
CLEAN pads to set the oven to start and stop
automatically at a time you set.
OVEN LIGHT PAD: Press to turn the oven light on
or off.
SELF CLEAN PAD: Press to select self-cleaning
function. See the using the Self-Cleaning Oven
section.
DISPLAY: Shows the time of day, oven
temperature, whether the oven is in the bake, broil
or self-cleaning mode and the times set for the timer
or automatic oven operations.
If “F– and a number” appear in the
display and the oven control signals, this
indicates a function error code.
Press the CLEAR OFF pad. Allow the oven to
cool for one hour. Put the oven back into
operation.
If the function error code repeats, disconnect
the power to the oven and call for service.
If your oven was set for a timed oven
operation and a power outage occurred,
the clock and all programmed functions must
be reset.
The time of day will flash and PF will
appear in the display when there has
been a power outage.
Note:
Loading ...
Loading ...
Loading ...