Loading ...
Loading ...
Loading ...
Before the first use
It is very important to let the
appliance stand for 30 to 60 minutes
after transport before you plug it in
for the first time. Failure to do so can
prevent the appliance from
functioning properly!
Packaging material
^ Remove all packaging material from
the inside of the appliance.
Protective film
The stainless steel trim and covers are
covered with a film to protect them
during transportation.
^ Pull the protective film off the
stainless steel surfaces.
Cleaning and care
^ Clean the inside of the appliance and
the accessories (see "Cleaning and
care").
Operating the appliance
A light touch of the finger on the sensor
buttons is all that is required to operate
this appliance.
After transporting the appliance, let
it stand for approx. 1/2 to 1 hour
before plugging it in. This is
necessary to ensure that the
appliance functions correctly!
Turning the appliance on
The refrigerator and freezer sections
can be turned on and off separately so
that you can use one section only.This
is useful when you only need to have
the freezer section running (when on
vacation, for example.)
^ Touch the button for turning the
refrigerator and/or the freezer section
On / Off so that the respective
temperature is displayed.
The appliance starts to cool.
The top temperature display shows the
temperature in the refrigerator section,
the bottom temperature is that in the
freezer section.
If the temperature in the freezer section
is above 32°F (0°C), only dashes are
displayed.
Turning the Appliance On / Off
16
Loading ...
Loading ...
Loading ...