Loading ...
Loading ...
Loading ...
17
1. Move the temperature control knob to the required temperature. See section ‘Cooking
Guide’ to select the right temperature.
2. Select the required cooking time (see section Cooking Guide’).
3. To switch on the appliance, turn the timer knob to the required cooking time.
Add 3 minutes to the cooking time stated in the tables on pages 7 and 8 when using
the appliance from cold.
Note: If you want, you can also let the appliance preheat without any food inside. In
this case, turn the timer knob to more than 3 minutes and wait until the heating-up
light goes out (after approx. 3 minutes). Then fill the basket and turn the timer knob to
the required cooking time (see Cooking Guide for timings).
The timer starts counting down the set cooking time.
The heating-up light goes on.
During the hot air frying process, the heating-up light goes on and off from time to time.
This indicates that the heating element is switched on and off to thermostatically maintain
the set temperature.
Excess oil from the food is collected in the bottom of the pan.
4. Some foods require shaking halfway through the cooking time (see section ‘Cooking
Guide’). To shake the food, pull the pan out of the appliance by the handle and shake it.
Then slide the pan back into the Fry Delight.
Caution: Do not press the basket release button (B) during shaking.
Tip: To reduce the weight of the pan, you can remove the basket from the pan and shake
the basket only. To do so, pull the pan out of the appliance (do not press the basket release
button), place it on a heat-resistant surface and press the basket release button and lift the
basket out of the pan.
Tip: You can set the timer to half of the cooking time, and when the timer sounds shake the
ingredients. Then set the timer again for the remaining cooking time.
Because the Air Pulse technology instantly reheats the air inside the appliance, pulling the
pan briefly out of the appliance during hot air frying barely disturbs the process.
5. When you hear the timer sound, the cooking time set has finished. Pull the pan out of
the appliance (do not press the basket release button) and place it on a heat-resistant
surface.
Note: You can also switch off the appliance manually. To do this, turn the timer control
knob to 0.
6. Check if the food is ready.
If the food is not ready yet, simply slide the pan back into the appliance and set the timer
for a few extra minutes.
Tip: To remove large or fragile foods, use a pair of tongs to lift the food out of the basket.
7. When the food is cooked, take out the pan and press the basket release button (B) and lift
the basket out of the pan. Tip the contents of the basket onto a plate.
Caution: Do not turn the basket upside down with the pan still attached to it, as any excess
oil that has collected on the bottom of the pan will leak onto the food.
After hot air frying, the pan and the food are very hot. Depending on the type of food
cooked in the Fry Delight, be careful as steam may escape from the pan.
8. When a batch of food is ready, the Fry Delight is instantly ready for preparing another
batch of food.
EN
Loading ...
Loading ...
Loading ...