Loading ...
Loading ...
Loading ...
Daytime Running Lamps
This function may be used to activate/deactivate the
daytime running lamps.
Proceed as follows to switch this function on or off:
1. Briefly push the SET/BACK button to display the
three submenus.
2. Briefly push the SET/BACK button. “On” or “Off”
will flash on the display (according to previous
setting).
3. Push and release the up or down arrow button for
setting.
4. Briefly push the SET/BACK button to go back to the
menu screen, or push and hold the button (approxi-
mately one second) to go back to the main screen
without storing the settings.
Exit Menu
This function closes the initial menu screen.
Briefly push the SET/BACK button to go back to the
main screen.
Push and release the up arrow button to return to the
first menu option (Speed Buzzer).
Push and release the down arrow button to return to the
last menu option (Daylights).
Change Engine Oil Indicator System
Your vehicle is equipped with an engine oil
change indicator system. The “Change Engine Oil”
message will flash in the instrument cluster display for
approximately ten seconds and the oil pressure warning
light will illuminate. The “Change Engine Oil” message
in the instrument cluster display and the oil pressure
warning light will turn off after approximately ten
seconds.
Reset of the Oil Change Reminder message as fol-
lows:
1. Without pushing the brake pedal, cycle the ignition
to the MAR/RUN position (do not start the engine).
2. Push and hold the accelerator pedal.
3. Push and release the brake pedal six times; with a
one second pause between each push of the brake
pedal.
4. After the 6th release of the brake pedal, pause one
second and then release the accelerator pedal.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 117
Loading ...
Loading ...
Loading ...