Loading ...
Loading ...
Loading ...
i
i
40
Access to the screen
Opening the screen
With the screen stored, press control
A
to open it.
The screen opens automatically when
the ignition is switched on, when the au-
dio/telephone is switched on, when an
outgoing telephone call is made, when
a voice command is given and when a
warning message linked with the STOP
warning light is received.
This screen is opened and stored auto-
This screen is opened and stored auto-
matically.
However, you can also open it, store it
and adjust it using the various manual
controls:
- opening or storing by means of control
A
,
- angle adjustments by means of con-
trol
B
.
It is also fitted with safety auto-reverse
protection.
Closing the screen
With the screen open, press control
A
to store it.
The screen is stored automatically
when the ignition is switched off, after
when the ignition is switched off, after
approximately three seconds, if the au-
dio/telephone is off.
When the screen is open, you can
adjust it precisely in different ways:
press the corresponding part of con-
trol
B
to move the screen towards
you or towards the windscreen,
or
push or pull the screen gently by
hand.
Adjusting the position of the screen
Safety auto-reverse
If the screen meets an obstacle as it
opens or closes, the movement stops
immediately and is reversed by a few
millimetres.
After clearing the obstacle, issue the
command required again.
Storing the position of
the screen
The system has four pre-set positions
in its memory.
Each time the screen is closed, the
system stores the last position of the
screen.
Each time the screen is re-opened, the
system returns the screen to the pre-set
position closest to that stored.
Loading ...
Loading ...
Loading ...