Loading ...
Loading ...
Loading ...
74 GETTING TO KNOW YOUR VEHICLE
(Continued)
SOFT TOP — IF EQUIPPED
If the temperature is below 72°F (24°C) and/or
the top has been folded down for a period of
time, the top will appear to have shrunk when
you raise it, making it difficult to put up. This is
caused by a natural contraction of the vinyl or
acrylic materials of the fabric top.
Place the vehicle in a warm area. Pull steadily
on
the top fabric. The vinyl will stretch back to its
original size and the top can then be installed. If
the temperature is 41°F (5°C) or below, do not
attempt to put the top down or roll the rear or
side curtains.
WARNING!
The fabric quarter panel cover assemblies,
rear window, and fabric top are designed
only for protection against the elements. Do
not rely on them to contain occupants
within the vehicle or to protect against
injury during an accident. Remember,
always wear seat belts.
Make sure hands and fingers are clear of
all pinch points when installing and
removing the soft top. The side bows may
cause serious injury if fingers or hands get
caught in-between.
CAUTION!
The soft top is not designed to carry any
additional loads such as roof racks, spare
tires, building, hunting or camping supplies,
and/or luggage, etc. Also, it was not designed
as a structural member of the vehicle and,
thus, cannot properly carry any additional
loads other than environmental (rain, snow,
etc.).
CAUTION!
Do not run a fabric top through an automatic
car wash. Window scratches and wax build up
may result.
Do not lower the top when the temperature is
below 41°F (5°C). Damage to the top may
result.
Do not move your vehicle until the top has
been either fully attached to the windshield
frame, or fully lowered.
Do not lower the top with the windows
installed. Window and top damage may occur.
Refer to “Appearance Care For Fabric Top
Models” in “Bodywork” in “Servicing And
Maintenance” for further information. It
contains important information on cleaning
and caring for your vehicle's fabric top.
Do not use any tools (screwdrivers, etc.) to pry
or force any of the clamps, clips, or retainers
securing the soft top. Do not force or pry the
soft top framework when opening or closing.
Damage to the top may result.
Failure to follow these cautions may cause
int
erior water damage, stains, or mildew on the
top material:
It is recommended that the top be free of
water prior to opening it. Operating the top,
opening a door or lowering a window while the
top is wet may allow water to drip into the
vehicle's interior.
Careless handling and storage of the soft top
may damage the seals, causing water to leak
into the vehicle's interior.
The soft top must be positioned properly to
ensure sealing. Improper installation can
cause water to leak into the vehicle's interior.
CAUTION! (Continued)
Loading ...
Loading ...
Loading ...