Loading ...
Loading ...
Loading ...
62 GETTING TO KNOW YOUR VEHICLE
(Continued)
6. Remove the four Torx head fasteners that
secure the hard top to the back of the
vehicle cab using the #T50
Torx head
dri
ver.
Torx Head Fastener Locations
7. Locate the wire harness on the left rear
in
side corner of the vehicle. To access the
harness, remove the plastic cover by
pushing on the side of the cover and sliding
it off.
NOTE:
Do not force open; this will break the plastic
cov
er.
Step Seven
8. To release the wire harness, pull back on
th
e red latch, then push down on the black
button while pulling the harness out.
Pull Back On Red Latch
Push Black Button To Release
9. Remove the hard top from the vehicle.
In
stall edge protectors and place the hard
top on a soft surface to prevent damage.
CAUTION!
The front panel(s) must be positioned
properly to ensure sealing. Improper instal-
lation can cause water to leak into the
veh
icle's interior.
The hard top assembly must be positioned
properly to ensure sealing. Improper instal-
lation can cause water to leak into the
veh
icle's interior.
Loading ...
Loading ...
Loading ...