Loading ...
Loading ...
Loading ...
Operating the appliance en-us
9
1Operating the appliance
Oper at i ng the appl i ance
Switching the appliance on
1. Press the main On/Off switch.
The appliance starts cooling and the light is
switched on when the door is open.
2. Set the required temperature.
~ "Setting the temperature" on page 9
Operating tips
■ When the appliance has been switched on, it may
take several hours until the set temperatures have
been reached.
■ The front sides of the housing are partly heated
slightly. This prevents condensation in the area
of the door seal.
Switching off and disconnecting the
appliance
Switching off the appliance
■ Press the main On/Off switch.
The appliance is no longer cooling.
Disconnecting the appliance
If you do not use the appliance for a prolonged
period:
1. Pull out mains plug or switch off fuse.
The appliance is no longer cooling.
2. Clean the appliance.
3. Leave appliance open.
Setting the temperature
Recommended temperature
Wine storage cabinet
1. To open the menu for setting the temperature,
press the : button.
2. Use the m/¢ button to select the desired
compartment.
3. Keep pressing the +/- button until the display
indicates the required temperature.
4. Confirm the selection by pressing the 8 button. If
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.
Humidity
If bottles with natural corks are stored for longer than
4 weeks, the natural corks may shrink if the humidity
is too low.
To prevent this from happening, store old wine
bottles in such a way that the cork is kept wet and
increase the humidity.
Switching humidity on and off:
1. Press : button to open the menu for setting the
climate zones.
2. Use m/¢ button to select the desired
compartment.
3. To switch on the higher humidity level, press
^ button.
The
^ symbol appears in the display.
To switch off, press
[ button.
The [ symbol appears in the display.
4. Confirm the selection by pressing 8 button. If the
button is not pressed, the appliance saves the
setting and automatically returns to the main
screen after a few seconds.
Display light
You can use the preprogrammed light modes to
illuminate your wine bottles when the door is closed.
The individual climatic zones have different
illumination levels.
Using the display light
1. Press the n button to open the Display light
menu.
2. Select a light mode or press the o button to
switch the display light off.
3. Press 8 button.
The setting is saved.
Clean lock
You can use this function to switch off the touch
function of the controls for 10 seconds. During this
time you can clean the display.
~ "Cleaning the display" on page 18
1. Press : button to open the Settings menu.
2. Press < button.
The cleaning display appears, and the countdown
starts.
Wine storage
cabinet:
11 °C/52 °F
Loading ...
Loading ...
Loading ...