Documents: Go to download!
- Owner's manual - (English, French, Spanish)
- Intended Use
- Before First Use
- Product Description
- Operation
- Cleaning and Maintenance
- Troubleshooting
- Specifications
Table of contents
USER MANUAL Dehumidifiers
Intended Use
• This product is intended for adding moisture to the air, and diffusing essential oils' aroma.
• This product is intended for private use only. It is not intended for commercial use.
• This product is intended to be used in dry indoor areas only.
• No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.
Before First Use
• Check the product for transport damages.
• Remove all the packing materials.
• Clean the product before first use.
• Before connecting the product to the power supply, check that the power supply voltage and current rating corresponds with the power supply details shown on the product rating label.
Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.
Product Description
A Light button B Mode button C Transducer component D Reservoir E Humidity sensor F Float G Water valve H Water tank I Mist nozzle J Water tank handle | K Tank cap L Power cord with plug M Light N Essential oil tray O High mode indicator P Low mode indicator Q Smart mode indicator R Scented air outlet S Brush |
Operation
Filling the water tank
Risk of electric shock! Disconnect the product from the power supply before removing the water tank (H).
Risk of electric shock! Do not exceed the maximum tank capacity
• Lift the water tank (H) from the main base. Invert the water tank.
• Rotate the tank cap (K) anti-clockwise to open the water tank (H).
• Fill the water tank (H) with cool, distilled water.
Risk of damage! Do not fill water through the mist nozzle (I) and scented air outlet (R). This will damage the product.
• Place the tank cap (K) on the water tank (H) and rotate it clockwise to close the tank.
• Wipe the water tank (H) dry and place it back on the main body.
If the water level is too low, the product stops the operation and the light (M) flashes red. Refill the water tank (H).
Operation modes
 | The mist nozzle (I) controls the direction which the steam is being released. Rotate the the nozzle (I) to adjust the mist direction. |
• Connect the product to the power supply. The light (M) switches on blue.
• Press the mode button (B) to toggle between:
| Mode | Indicator on | Function |
| Smart | (Q) | The product adjusts the operation speed automatically, according to ambient humidity. |
| 24H | (P) | The product operates at low speed. |
| 12H | (O) | The product operates at high speed. |
| OFF | – | The product is off. |
Do not block the humidity sensor (E). This will affect the mist output function for the Smart mode.
Operation duration
Operation duration is subject to differences in water/ ambient temperature and humidity level.
| Tank capacity | Mode | Humidity output | Operation duration |
| 2 L | 24H | max. 90 ml/h | Around 24 H |
| 12H | max. 185 ml/h | Around 12 H | |
| 4 L | 24H | max. 175 ml/h | Around 24 H |
| 12H | max. 360 ml/h | Around 12 H |
Switching the light on/off
• To switch off the light (M), press the light button (A).
• To switch on the light (M), press the light button (A) again.
Aroma diffuser
• Push to eject the essential oil tray (N) and pull it out of the main body.
• Put few drops of an essential oil (not provided) onto the tray.
• Push the essential oil tray (N) back in place.
Cleaning and Maintenance
Risk of electric shock! To prevent electric shock, unplug the product before cleaning.
Risk of electric shock! During cleaning do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water.
Clean the product at least once in every two weeks.
Cleaning the main base
• To clean the product, wipe with a soft, slightly moist cloth.
• Dry the main base after cleaning.
• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
Cleaning the water tank, reservoir and oil tray
• Rinse the parts with a 5-15% vinegar solution.
• Pour out the solution residue.
• Rinse the parts with water.
• Use the brush (S) to clean the reservoir (D) and other tiny gaps that are hard to reach.
Storage
• Store the product in its original packaging in a dry area. Keep away from children and pets.
Maintenance
• Any other servicing than mentioned in this manual should be performed by an authorized service representative.
Troubleshooting
| Problem | Solution |
| The product does not switch on. | • Check if the power plug is connected to the power outlet. Check if the power outlet works. |
| Unpleasant odor. | • Clean the water tank (H) and the reservoir (D). • Replace the water. • Clean the essential oil tray (N). |
| Blue light appears but no mist emitted. | • Check if the product is switched on. • Check the mist nozzle (I) for obstructions. |
| Adequate water but red light blinks. | • Check the float (F) for obstructions. • Refill the water tank (H). |
| The product is leaking. | • Check if the tank cap (K) is firmly locked. • Check if the water tank (H) is broken. |
Specifications
See other models: AMZ-5KDBS-K2 AMZ-9KDBS-K2 KTC-004BZ 1013751-558-A60 TH10182
