Loading ...
Loading ...
Loading ...
–
19
–
EN
C
Audio Settings
Choose the appropriate Audio Settings for your device. It only affects the Sound during DVD Playback. Follow steps 1 and 2 on
page 16.
3 Select the desired item.
System
Language
Audio
Video
Preference
8
Night Mode
Digital Audio
0
<Audio menu>
4
Digital Audio: (Default: PCM)
Set to “Bitstream” when the unit is connected to a Dolby
Digital decoder.
– Bitstream: outputs a Dolby Digital signals.
– PCM: convert the Dolby Digital into PCM (2 channel).
5 To Exit the Menu
e
Night Mode
Digital Audio
PCM
Bitstream
Select the Desired
Setting.
Night Mode (Default: 0)
Adjusts for Clarity even when the Volume is Low, by
Compressing the Range of the lowest sound level and the
highest sound level.
ge
nce
8
Night Mode
Digital Audio
0
Note(s):
Audio Out:
– Bitstream:
Connecting to a Dolby Digital decoder for Dolby Digital Audio output.
– PCM:
Connecting to another device (an MD deck or DAT deck etc.) without a Dolby Digital Decoder.
Convert the Dolby Digital into LPCM (2 channel).
• This unit does not support DTS audio. This is not a malfunction.
You need to set this unit to “Bitstream” in the “Audio Out” Menu and also need to Connect to a TV or Amplifier that
supports DTS, then the audio will be output as DTS.
It is only available when connected via a Coaxial cable.
• “Digital Audio” cannot be configured when Voice Guide is set to On, as it is fixed to PCM. In order to configuring the
setting, set Voice Guide to Off.
Loading ...
Loading ...
Loading ...