Loading ...
Loading ...
Loading ...
41
GB
Other Functions
[Center] 0.0 dB: Set the center speaker
level.
[Surround Left/Right] 0.0 dB
: Set the
surround speaker level.
[Subwoofer] 0.0 dB
: Set the subwoofer
level.
Adjust the sound level based on the
default subwoofer volume VOL 10
(page 58).
[Relocation]
You can correct the speaker position
virtually to improve the surround effect.
[On]: You can hear sound from a virtually
relocated speaker position determined by
[Auto Calibration].
[Off]
: You can hear sound from the actual
speaker position.
• This setting is only reflected after
performing [Auto Calibration].
[Test Tone]
The speakers will emit a test tone to
adjust [Level].
[Off]
: The test tone is not emitted from
the speakers.
[On]: The test tone is emitted from each
speaker in sequence while adjusting
level. When you select one of the
[Speaker Settings] items, the test tone is
emitted from each speaker in sequence.
Adjust the sound level as follows.
1 Set [Test Tone] to [On].
2 Press / to select [Level], then
press .
3 Press / to select the speaker type
you want, then press .
4 Press / to select the left or right
speaker, then press / to adjust
the level.
5 Press .
6 Repeat Steps 3 to 5.
7 Press BACK.
The system returns to the previous
display.
8 Press / to select [Test Tone], then
press .
9 Press / to select [Off], then press
.
• The test tone signals are not output from
the HDMI OUT (ARC) jack.
• If no sound is output from the subwoofer,
please check whether the subwoofer
volume is not VOL 0.
Note
Notes
Loading ...
Loading ...
Loading ...