Loading ...
Loading ...
Loading ...
27
GB
Settings and Adjustments
[Bluetooth Codec - AAC]
This function is only available when you
set [Bluetooth Mode] to [Receiver] or
[Transmitter].
[On]
: Enable AAC codec.
[Off]: Disable AAC codec.
• You can enjoy high-quality sound if AAC is
enabled and your device supports AAC. If
you cannot listen to AAC sound with your
device, select [Off].
[Bluetooth Codec - LDAC]
This function is only available when you
set [Bluetooth Mode] to [Receiver] or
[Transmitter].
[On]
: Enable LDAC codec.
[Off]: Disable LDAC codec.
• You can enjoy more high-quality sound if
LDAC is enabled and your device supports
LDAC. If you cannot listen to LDAC sound
with your device, select [Off].
[Wireless Playback Quality]
You can set the transmission data rate of
LDAC playback. This function is only
available when you set [Bluetooth Mode]
to [Transmitter] and [Bluetooth Codec -
LDAC] to [On].
[Auto]: The transmission rate is
automatically changed depending on the
environment. If audio playback is
unstable in this mode, use the other three
modes.
[Sound Quality]: The highest bit rate is
used. Sound is sent in a higher quality;
however, audio playback sometimes may
become unstable when the link quality is
not good enough.
[Standard]
: The middle bit rate is used. It
balances both sound quality and
playback stability.
[Connection]: Stability is prioritized.
Sound quality may be reasonable and
connection status will most likely be
stable. If the connection is unstable, this
setting is recommended.
[OSD Language]
You can select the language you want for
the system on-screen display.
[Wireless Sound Connection]
You can make further settings for the
wireless system. For details, see “Further
Setting for the Wireless System
(Subwoofer/Surround speakers)”
(page 38).
[IR-Repeater]
[On]: Remote signals for the TV are sent
via an IR blaster (page 37).
[Off]
: Turns off the function.
[HDMI Settings]
[Control for HDMI]
[On]
: Turns on the [Control for HDMI]
function. You can operate mutually
between devices that are connected with
an HDMI cable.
[Off]: Off
[Audio Return Channel]
This function is available when you
connect the system to a TV’s HDMI IN jack
that is compatible with the Audio Return
Channel function and [Control for HDMI] is
set to [On].
[Auto]
: The system can receive the digital
audio signal of the TV automatically via an
HDMI cable.
[Off]: Off
Note
Note
[System Settings]
Loading ...
Loading ...
Loading ...