Loading ...
Loading ...
Loading ...
GEAR SELECTOR OVERRIDE
If a malfunction occurs and the gear selector cannot be
moved out of the PARK position, you can use the following
procedure to temporarily move the gear selector:
1. Turn the engine OFF.
2. Firmly apply the parking brake.
3. By pulling the gear selector boot, carefully separate the
gear selector bezel and boot assembly from the center
console, and raise it up to access the gear selector
mechanism.
4. Press and maintain firm pressure on the brake pedal.
5. Insert the equipped screwdriver or similar tool into the
gear selector override access hole (at the right front
corner of the gear selector assembly) and push and hold
the override release lever down.
NOTE: When inserting the screwdriver, keep it as vertical
as possible during the override operation.
6. Move the gear selector to the NEUTRAL position.
7. The vehicle may then be started in NEUTRAL.
8. Reinstall the gear selector boot.
Gear Selector Override
1 — Raised Gear Selector Boot
2 — Gear Selector Override Access Hole
236 IN CASE OF EMERGENCY
Loading ...
Loading ...
Loading ...