Loading ...
Loading ...
Loading ...
Cold Weather Operation
To prevent possible engine damage while starting at low
temperatures, this vehicle will inhibit engine cranking
when the ambient temperature is less than –22°F (–30°C)
and the oil temperature sensor reading indicates an engine
block heater has not been used. An externally powered
electric engine block heater is available as a factory in-
stalled option.
At the time the engine is shut off, the message “Engine
Heater Recommended” will be displayed in the instrument
cluster when the ambient temperature is below 5°F (–15°C).
This acts as a reminder to avoid possible crank delays at
the next cold start.
CAUTION!
Use of the recommended SAE 5W-40 Synthetic oil and
adhering to the prescribed oil change intervals is
important to prevent engine damage and ensure satis-
factory starting in cold conditions.
Extended Park Starting
NOTE: Extended Park condition occurs when the vehicle
has not been started or driven for at least 30 days.
1. Install a battery charger or jumper cables to the battery
to ensure a full battery charge during the crank cycle.
2. Cycle the ignition to the START mode and release it
when the engine starts.
3. If the engine fails to start within 10 to 15 seconds, cycle
the ignition to the OFF mode, wait five seconds to allow
the starter to cool, then repeat the Extended Park
Starting procedure.
4. If the engine fails to start after eight attempts, allow the
starter to cool for at least 10 minutes, then repeat the
procedure.
CAUTION!
To prevent damage to the starter, do not crank continu-
ously for more than 10 seconds at a time. Wait 10 to 15
seconds before trying again.
176 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...