Loading ...
Loading ...
Loading ...
41
ENGLISH
Troubleshooting table / Specifications
In menu, TUNING-line
can not be selected.
The unit is set to AV mode. Press 1 on the remote
control.
Symptom
Possible solution
Page
No picture, no sound
Switch on the set.
Check the 100~240 V wall outlet.
Select appropriate input mode.
No reception Preset the station without using the AV cable.
Press 1 on the remote control.
Connect the antenna.
Check your antenna.
The TV switches off with
missing antenna input signal
This is normal.
15 minutes after the antenna signal has disappeared,
the set will change to standby.
Specifications
Color System:
Frequency Range:
Power Supply:
Power Consumption:
LCD:
HDMI input:
Output Power:
Surrounding temperature:
Operating Humidity:
Dimensions:
Weight:
Accessories:
PAL/SECAM/NTSC
1~S6, S7~S36, S37~E69
AC 100~240V, 50/60Hz
Operation: approx. 170W
Stand by: approx. 1W
31.5" TYPE (80 cm visible)
TFT low-glass Active Matrix Colour LCD, 1366 x 768 Pixel
Brightness: 500 cd/m2
View Lange:Left/Right: 85 degree Up/Down: 85 degree
HDMI compliant (type A connector)
HDCP compliant
Suggested scan rates:
PAL: 576i/576p/720p/1080i
NTSC: 480i/480p/720p/1080i
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
10W x 2 (MAX)
Operation: 5°C ~ 40°C
Storage: –20°C ~ 60°C
Less than 80%RH
82.2(W) x 60.4(H) x 33.3(D) cm
approx. 19 kg (w/o Accessories)
2 batteries (AAA/R03/UM-4)
Remote control unit
AC cord
Weight and dimensions are approximate. Because we continually strive to improve our products we
may change specifications and designs without prior notice.
Troubleshooting table
Please check the following items, before you request for service.
18
12
12
23
20
Wrong Colours
Colour and Brightness errors can occur when the
viewing angle / ambient air temperature (see technical
specifications) are exceeded.
3V90441A [E] P40-BACK 31/10/05, 9:22 AM41
32LD380T
A
HITACHI
Loading ...