Loading ...
Loading ...
Loading ...
8
The oven light turns on while the oven is
working.
The oven door can be opened at any time
during operation. The oven will automatically
shut off.
Each time a button is pressed, a BEEP will
sound to acknowledge the press.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show nothing when the oven is
plugged in, press and hold the POWER ON
pad until display is turned on and beep sounds.
When the Stop/Clear button is pressed during
the oven operation, the oven stops cooking and
all information retained. To erase all information
press the Stop/Clear button once more. If the
oven door is opened during the oven operation,
all information is retained.
If the Start button is pressed and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely. The oven will not
start cooking until the door is completely closed
or the program has been reset.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a 120V~ 60Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
4. Set required programme and time, then press Start.
5. Once cooking is complete take care removing container as it will be hot.
1
2
3
4
5
6
7
Make sure the oven is properly installed
and plugged into the electrical outlet.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the Power Level button. The chart shows the display, the power level
and the percentage of power.
Press Power Level button Power level (Display) Approximate Percentage of Power
once P-HI 100%
twice P-80 80%
3 times P-60 60%
4 times P-40 40%
5 times P-20 20%
KOR6LBRWWAE013AWA8,KOR6LBRWMAE013AMA8(영).indd 8 16. 2. 23. 오후 6:01
Loading ...
Loading ...
Loading ...