Loading ...
Loading ...
Loading ...
23
1. Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. See “Electrical Requirements.”
2. Check that all parts are now installed. If there is an extra part,
go back through the steps.
3. Check that you have all of your tools.
4. Dispose of/recycle all packaging materials.
5. Plug into a grounded outlet, or connect power.
LEVELING
6. Check dryer operation. Close dryer door. Insert coins in slide
and press slide in slowly. Select the COTTON/WHITES cycle
andletthedryerrunforatleastveminutes.
NOTE: Dryer door must be closed for dryer to operate.
7. Open the dryer door. Check that the inside of the dryer is
warm. If the burner does not ignite and you can feel no heat
insidethedryer,shutodryerfor5minutes.Checkthatall
supply valve controls are in On position and that the electrical
cord is plugged in. Repeat 5-minute test.
8. If drying time is too long, make sure that the lint screen
iscleanandthattherearenoobstructionstoairow
in the dryer vent system.
9. Restart the dryer and allow it to complete a full cycle to make
sure it is working properly.
2. Grip dryer from top and rock back and forth, making sure all
fourfeetarermlyonoor.Repeat,rockingdryerfromside
to side. If dryer rocks, adjust leveling feet.
3. If dryer is not level, turn the leveling feet counterclockwise
to lower the dryer or clockwise to raise the dryer. Recheck
levelnessofdryerandthatallfourfeetarermlyincontact
withtheoor.Repeatasneeded.
HELPFUL TIP: You may want to prop up front of dryer about
4"(102mm)withawoodblockorsimilarobjectthatwillsupport
weight of dryer.
COMPLETE INSTALLATION
1. Remove cardboard from beneath dryer. Place a level on top
edges of dryer, checking each side and front. If not level, tip
dryer and adjust feet up or down, repeating as necessary.
Leveling your dryer properly reduces excess noise and vibration.
Not Level LEVEL Not Level
Loading ...
Loading ...
Loading ...