Loading ...
Loading ...
Loading ...
6
CONTROL PANELS AND FEATURES
WASHER
LED TIME/STATUS DISPLAY
The Remaining Time display shows the time required for
the cycle to complete. Factors such as load size and water
pressure may affect the time shown in the display. Tightly
packed loads, unbalanced loads, excessive suds, or adding
or removing items may cause the washer to adjust the cycle
time as well.
LID LOCK LIGHT
The Lid Lock indicator lights up when the lid is locked and
cannot be opened. If you need to open the lid, press and
hold START/PAUSE. The lid will unlock 1 minute after the
washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Press the
START/PAUSE button again to restart the cycle.
START/PAUSE
After selecting a wash cycle, press START/PAUSE to start
the cycle. Press once to pause a cycle. The ashing lights
indicate the selected cycle and the current process.
CYCLE TIME (+ or -)
n Press “+” or “-” to adjust the duration of a cycle.
n LED display will show the time remaining for the cycle
to complete.
n If an out-of-range adjustment is made, a buzzer
will sound.
End-of-Cycle Signal
Press and hold the plus (+) button for 3 seconds
to enable or disable the end-of-cycle signal.
Press and hold the minus (-) button for 3 seconds
to mute the signal.
1
2
3
4
CYCLES
Press CYCLES to select a wash cycle. Choose from Normal,
Delicate, Heavy Duty, Rinse, Spin, or Clean Washer.
TEMP
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
CONTROL LOCK
Press and hold TEMP for 3 seconds to lock the controls.
Press and hold for 3 seconds to unlock. You may still press
POWER ON/OFF to turn off the washer.
POWER ON/OFF
Press POWER ON/OFF to turn on or off the washer.
Press once while a cycle is running to stop the washer.
5
66
7
1
2 3
5
4 6
4
7
Loading ...
Loading ...
Loading ...