Loading ...
Loading ...
Loading ...
Appliance settings en
33
2 Appliance settings
Appli ance settings
You can activate/deactivate the
childproof lock and adjust the basic
settings (e.g. signals).
Childproof lock
Activating the childproof lock prevents
the settings from being accidentally
changed on the control panel.
Activating/deactivating the childproof
lock:
■ Press and hold D 3 sek. (Child
Lock 3 sec.) for 3 seconds.
Note: The childproof lock will remain
active, even once the appliance has
been switched off. If you wish to change
settings on the control panel when you
turn on the appliance, you will need to
deactivate the childproof lock.
Notification signal
You can activate or deactivate the
notification signal at the end of the
programme. If you activate this setting,
an audible signal will sound once the
programme has ended.
Activate/deactivate the appliance
setting as follows:
Press C .
The notification signal at the end of
programme is activated/deactivated.
Note: If a signal does not sound when
the programme ends even though the
notification signal is activated, you can
change the appliance setting.
Basic settings
You can adjust certain basic settings on
the appliance. To make adjustments,
you first need to call up the setting
mode :
1. Set the programme to the
( position.
2. Press ü ‰ (Drying Target) and, at
the same time:
3. Set the programme to the
0 position.
4. Release ü ‰.
Setting mode is now activated.
#
+
3
;
#
+
3
;
Loading ...
Loading ...
Loading ...